A toe-kick is a recessed space built into the bottom of a cabinet which sits on the floor. Toe kicks are most common in kitchens, but can be used in any area with cabinets sitting on the floor. In many toe kick areas, there will be a vent for heating/cooling systems. Traditionally the ductwork/hole in the cabinet for the vent will be 2x10, 2x12, 2x14 or 3x10. Toe kick vents are sometimes tricky to find because there is limited space for a faceplate in the toe-kick. Traditionally toe kick areas have a limited height of 3.5 inches (this can vary). Please review each product description for overall faceplate dimensions to make sure that size will fit under your cabinets. These toe kick registers and returns can only be used in the wall and are NOT suitable for use in the floor.

Please keep in mind the photos listed are not of the exact size listed. Click the photo or link below photo to go directly to that style of register.
Please note: Sizes available and the overall faceplate size of the vents will differ from style to style.

For easy browsing of our floor registers and grilles, visit our "Browse by Size" page.  

Toe Kick Registers Available
(with damper)

Brown Steel Toe Kick - 3 sizes available

Mission Registers 6 Finishes **must purchase wall clips separately to convert to sidewall use

Contemporary Registers 6 Finishes **must purchase wall clips separately to convert to sidewall use

Victorian Registers 6 Finishes **must purchase wall clips separately to convert to sidewall use

Toe Kick Returns Available
(no damper)

Pattern Cut Wood Returns - *Toe Kick Sizes would need to be a special order size - Please call for pricing

TruAire Toe Kick Grilles - White or Golden Sand

Toe Space Grilles - Black 2 sizes available